RAU group workbench 2700x2340x790-1140 mm Series 400-EA

Solid beech cover plate (25 mm thick), fully wired and earthed, in accordance with standards: DIN VDE 0113-1 - final inspection in accordance with the Machinery Directive, DIN EN 60529 (VDE 0470-1) - types of protection through housing (IP code) - IP40, DIN EN 61140 (VDE 0140-1) - protection class I.Media attachment including connection cable 09-AL400V (includes 5-pole connection cable with plug) as well as preparation for supply of air and data cable.Connection cable: cable cross-section per core 2.5 m²; total load up to 10.5 kW.All 6 sides of the media top unit are equipped as follows (from left to right):1x built-in module 09-EM100-400V:Module with three-phase socket outlet with hinged cover 400V / 16A.1xInstallation module 09-EM100-LUFT: Module with compressed air quick coupling G1/4, NW 7.2 brass.1xInstallation module 09-EM100: Module without equipment as dummy cover.1xInstallation module 09-EM200-230V-2DE: Module with 2x socket outlet with hinged cover 230V / 16A (for country/plug: Germany / type F).Installation modules in accordance with the directives: 2001-95-EC - General Product Safety, 2006-42-EC Machinery Directive, 2011-65-EU - Restriction of the use of hazardous substances in electrical and electronic equipment, 2011-35-EU - Provision of electrical equipment within certain voltage limits.Note: Please note that the media attachment must not be opened and each side of the media attachment is subject to a power limit of max. 16A.Solid beech worktop, 40 mm thick.6-Corner worktop (2-part, including worktop-plate connector and fittings), edge length 1350 mm, corner dimensions 2700x2340 mm. Beech frame with finger-joint gluing. Front edge with radius. Surface protection with environmentally friendly lacquer oil. The classic worktop: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from tree to worktop) with raw material from sustainable and regional forestry.System substructure, H750-1100 mm.12-leg frame with six pairs of frame legs made of C-profile steel (70x50x2 mm) incl. depth bracing (top and bottom). Frame legs at the top with wide support surface (120 mm) and at the bottom with integrated height adjustment/height adjustment using C-profile steel with hole pattern (25 mm) and floor anchoring option using perforated foot plates.