RAU group workbench 2700x2340x890mm 6x2-drawer partial extension 6x1 door

Solid beech cover plate (25 mm thick).Completely wired and earthed, in accordance with the standards: DIN VDE 0113-1 - final inspection in accordance with the Machinery Directive, DIN EN 60529 (VDE 0470-1) - types of protection by enclosure (IP code) - IP40, DIN EN 61140 (VDE 0140-1) - protection class I.Media attachment including connection cable 09-AL400V (includes 5-pole connection cable with plug) and preparation for supply of air and data cable.Connection cable: cable cross-section per core 2.5 m²; total load up to 10.5 kW.All 6 sides of the media top unit are equipped as follows (from left to right):1x built-in module 09-EM100-400V:Module with three-phase socket outlet with hinged cover 400V / 16A.1xInstallation module 09-EM100-LUFT: Module with compressed air quick coupling G1/4, NW 7.2 brass.1xInstallation module 09-EM100: Module without equipment as dummy cover.1xInstallation module 09-EM200-230V-2DE: Module with 2x socket outlet with hinged cover 230V / 16A (for country/plug: Germany / type F).Installation modules in accordance with the directives: 2001-95-EC - General Product Safety, 2006-42-EC Machinery Directive, 2011-65-EU - Restriction of the use of hazardous substances in electrical and electronic equipment, 2011-35-EU - Provision of electrical equipment within certain voltage limits.Note: Please note that the media attachment must not be opened and each side of the media attachment is subject to a power limit of max. 16A.Solid beech worktop, 40 mm thick.6-Corner worktop (2-part, including worktop-plate connector and fittings), edge length 1350 mm, corner dimensions 2700x2340 mm. Beech frame with finger-joint gluing. Front edge with radius. Surface protection with environmentally friendly lacquer oil. The classic among worktops: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from the tree to the worktop) with raw material from sustainable and regional forestry.system substructure, H850 mm.6 Substructure container with plinth, W580 x D650 x H850 mm, each flush on the right at the edge of the worktop with the following division:2 x drawer size L 2xH90 mm, 1 x hinged door size L 1xH540 mm (behind it 1x shelf L (height-adjustable).drawer size L (inside W490 x D560 mm, load capacity 100 kg). Partial extension runners on roller bearings (90 % extension) with self-closing mechanism and return stop. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer well completely closed for optimum storage of drawer partition sets.Hinged doors with self-retracting spring hinges, opening width 180 degrees.Full-length ErgoScript® handle strip: sheet steel base with aluminum-colored overlay and integrated transparent cover (incl. label strips).Central locking (pin cylinder lock with 2 keys).Panel set between the base containers.