RAU table trolley Series E 700x700x650-1000 mm EGB melamine top 28 mm

EGB worktop with melamine resin coating, 28 mm thick (volume conductive). Top and underside with a conductive, light gray melamine resin direct coating. Melamine resin coating in accordance with DIN68765. Splash-proof and dirt-resistant, surface properties in accordance with EN14322/EN14323: Discharge values according to EN61340, abrasion resistance class 3A, scratch resistance N greater than 1.5, stain resistance level ? 3 (e.g. acetone, alcohol, organic solvents, white spirit), susceptibility to cracking level ? 3, resistance to cigarette burns grade 3, resistance to water vapor grade 4, certificate of safety with regard to migration behavior, therefore also suitable for use in the food industry. Covering normally flammable (B2) according to DIN4102. Board core made of volume conductive chipboard in accordance with EN309/EN312 (emission class E1). Light gray, antistatic ABS edge on all sides. System substructure, W700 x D500 x H630-980 mm. 4-leg frame with two pairs of frame legs made of profile steel tube (45x45x3 mm) including depth bracing (center). Frame legs with 4 swivel castors, 2 of which have brakes (castor diameter 100 mm, overall height 125 mm, tread made of thermoplastic rubber (electrically conductive, gray, non-marking, 85 degrees Shore), wheel body made of polypropylene). Frame feet at the top with integrated height adjustment/height adjustment by means of aluminum profile (40x40 mm), the working height can be infinitely adjusted via the profile groove. Cross struts made of profile steel tube (35x35x2 mm) at the top under the worktop (front, rear) and depth struts made of angle iron (40x35x2 mm) with mounting adapter (left, right). EGB shelf with melamine resin coating (volume conductive), W608 x D470 x S28 mm.