RAU work table Tom height-adjustable 1250x1000x760-1080 mm sheet steel top

Worktop with sheet steel covering, 25 mm thick. Top side with a 1.5 mm thick, galvanized sheet steel covering; L-shaped fold at the front edge. Sheet steel to DX51D+Z 275MA, material number 1.0226 in accordance with DIN EN 10327/10346. Splash-proof, dirt-resistant, temperature-resistant, pressure-resistant. Largely resistant to acids, oils, greases, solvents and chemicals. Covering flame retardant (B1) according to DIN 4102. panel core made of MDF (medium density fiberboard). System substructure, W1150 x D860 x H740-1060 mm. 4-leg frame with two pairs of frame legs made of profile steel tube (60x30x2 mm) including depth bracing (top and bottom). Frame legs at the bottom with end element including height adjustment. Cross struts made of profile steel tube (50x25x2 mm) at the top under the worktop (front and rear). Stiffening beams at the rear (left and right) as a connection between the pair of frame legs and the rear cross strut. The frame legs are prepared for mounting/retrofitting a castor set. Note: This basic table can be supplemented with an extension table of the same depth.