RÖHM 5-axis clamp RVM-125 with quick-change jaw system for the AMF zero-point clamping system

Brief description: Eccentric clamping, with one fixed and one movable jaw. Scope of supply: Clamp, 1/2-inch hex socket, operating instructions, without stepped jaws, without fixing key Technical features: Mounting options: - with screws through the base rail (alignment possible via keyway blocks) - via zero-point clamping system (for EasyLock, diameter 25/M12) - using clamping claws on the outer contour of the rail (alignment possible via keyway blocks). Rail lengths suitable for zero-point clamping systems with a 350 × 350 mm mounting plate. Flexible mounting for short set-up times; Max. clamping force of 40 kN (per jaw) at 100 Nm torque; wide clamping range: basic clamping stroke 95 mm. Applications: The RVM is designed for modern 5-axis machining; equipped with a quick-change jaw system to reduce set-up times. The open design is easy to clean and prevents chip build-up. Advantages: Quick-change jaw system (jaws can be changed in seconds); clamping centre freely positionable on the base rail; good accessibility for machining tools; versatile mounting options Further information: 5-axis clamping unit RVM-125 with quick-change jaw system, for AMF zero-point clamping system