SAUTER manual Shore test stand TI-HED hardness scale Shore D hardness measurement 50 N

High-quality test stand for Shore hardness testing of plastics in industry and laboratories; one test stand for two hardness scales: Only the additional weight TI-HE needs to be screwed onto the TI-HEA test stand to make it suitable for Shore D hardness tests, see accessories; Steel plate, can be levelled for precise measurements; Levelling device: For precise alignment of the steel base plate, e.g. for inhomogeneous test objects. for inhomogeneous test objects; Mechanical design: Robust design enables precise measuring movements; The accuracy of the measurement result is higher with this test stand than with a manual measurement; Simple handling enables repeatable measurement results:; Operation:1. The SAUTER HED hardness tester is mounted in a suspended position2. The test table can be aligned under the Shore hardness tester using 2 screw mechanisms3. The test object is placed on the round test table directly under the measuring tip of the hardness tester4. Pressing down the lever releases the test weight, which then presses the measuring tip into the test object with its weight; hardness tester not included. Further information: EAN number: 4045761274044 Manufacturer's article number: TI-HED.