STAHLWILLE Torque screwdriver set TORSIOTRONIC 10/29 29-piece 96510000

STAHLWILLE torque screwdriver set 29 pieces:1 electromechanical torque screwdriver 1/4" no. TORSIOTRONIC® 10: 100-1000 cN-m1 CD SensoMaster 4, 1 insulating washer no. 701/2, 1 cross handle with sliding piece 1/4" L. 250 mm, 1 socket with hexagon 1/4" no. 40: 4; 5; 5.5; 6; 7; 8; 9; 10 mm, 3 bit screwdriver sockets for Phillips screws 1/4" no. PH1221-1223: PH1; PH2, PH3, 3 bit screwdriver bits for Phillips screws 1/4" no. PZ1221-1223: PZ1; PZ2, PZ3, 4 INHEX inserts 1/4" no. 44 K: 3; 4; 5; 6 mm, 5 screwdriver bits TX® 1/4" no. 44 KTX: T8; T9; T10; T15; T20, 5 TX® screwdriver bits with 1/4" hole no. 44 KTXB: T8; T9; T10; T15; T20, 1 bit holder 1/4" no. 412: L. 25 mm, 1 TX® offset screwdriver no. 10766: T8, 1 USB connection cable, 1 lithium-ion rechargeable batteryTop feature of the torque screwdriver:- electromechanically indicating and triggering- integrated bit ratchet with 80 teeth for a working angle of just 4,5° and therefore particularly fine-grained working - ideal for hard-to-reach screw connections- after triggering, the slipping mechanism prevents the set tightening torque from being unintentionally exceeded and the screw from being overtightened- clear display of all relevant information on a bright and battery-saving OLED color display - readable from almost any angle- visual assessment of screw tightening using traffic light colors in the display and LEDs on the side- display in various languages- long-lasting battery life with battery-saving standby mode. The batteries can be changed quickly and easily- Stores up to 2.500 tightening operations and sequences for later readout and documentation on a PC using the integrated micro USB interface- Target torque and tolerances for evaluating the measured value can be set individually- Short familiarization time thanks to almost self-explanatory controls and an easy-to-understand menu structure- Three operating modes (Click, Track, Peak Hold)- Visual, acoustic and haptic stop signal- The display is available in various languages, acoustic and haptic stop signal- the ergonomically optimized ball handle enables fatigue-free working and is resistant to oils, greases, fuels, brake fluids and Skydrol- left and right-hand tightening- with 1/4" external square (6.3 DIN 3120/ISO 1174-1) for holding 1/4" sockets- with 1/4" internal square at the end of the handle (6.3 DIN 3120/ISO 1174-1) for holding a 1/4" cross handle- units of measurement: cN-m, N-m, ft-lb, in-lb, in-oz- included in the scope of delivery: SensoMaster 4 software, USB cable, bit holder, cross handle (size 10)- Supplied with lithium battery 3.6 V, type 18650, packaged in accordance with UN 3480- Patented- Certificate in accordance with DIN EN ISO 6789-2:2017- In sturdy plastic case- Display deviation ± 4 %. Further information: EAN number: 4018754323289 Manufacturer's article number: 96510000.