STAHLWILLE Torque wrench MANOSKOP 714 Measuring range 80-800Nm 96500980

STAHLWILLE angle wrench 4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")- High-resolution color OLED display and lateral signal lights- Visual evaluation of the tightening case: yellow light (pre-warning threshold reached), green light (in the target range), red light (measured value outside the tolerance range)- Freely configurable menu structure- Bayonet lock for battery/rechargeable battery- Optional: Li-ion rechargeable battery no. 7195-2 and charger no. 7160- 3 function modes: triggering (patented electromechanical triggering), peak hold (indicating operation with peak value display) and track (indicating operation with actual value display)- Micro-USB interface for data exchange- Optional Bluetooth Low Energy module (5.2)- QuickRelease safety lock- Interchangeable system for insertion tools- Data storage of up to 2.500 screwdriving operations incl. date and time stamp- up to 200 tightening operations can be programmed in a maximum of 25 schedules- various tolerance limits can be set depending on the tightening operation- acoustic and visual evaluation of the tightening operation- quick and precise setting via keypad- no unintentional adjustment thanks to password-protected key lock- acoustic and visual signal warns of torque wrench overload and forced release in clockwise tightening- automatic indication of the next calibration date, freely configurable according to time and/or number of loads- fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factors- Units of measurement: N-m, ft-lb, in-lb- Automatic gauge block correction: option to enter a deviating gauge block to ensure the desired target value- Immediately ready for use again after release- Right-hand and left-hand tightening - the insertion tool must be rotated for left-hand tightening in the "releasing" function mode- Visual, audible and tactile release signal- Torque and angle of rotation displays visible simultaneously- Measurement independent of the point of force application (for sizes 1, 2 and 4)- Safe and reliable measurement of torque and angle of rotation 1, 2 and 4)- Safe handling thanks to ergonomically shaped 2-component handle (resistant to the most common oils, greases, fuels, brake fluids and Skydrol)- 3 certificates enclosed (torque display/release in accordance with DIN EN ISO 6789-2:2017, angle of rotation in accordance with VDI/VDE 2648-2)- In a sturdy plastic case (sizes 40-100 in sheet steel box)- registered design, patented- supplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 V- display resolution angle of rotation 0.1°- display deviation angle of rotation ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digit- display resolution torque ≤ 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-m- Display deviation torque ± 2 %, ± 1 digit. Further information: EAN number: 4018754222865 Manufacturer's article number: 96500980.