STAHLWILLE Torque wrench MANOSKOP 730 Fix Measuring range 200-1000Nm 96503100

STAHLWILLE torque wrench for work in series production- Adjusting knob can be unscrewed after setting the release torque - this prevents unintentional changing of the set torque- The TX® Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the seal- Release- No need to reset to "0" as the measuring element is only loaded during the tightening process- Holder for interchangeable plug-in tools- QuickRelease safety lock- Fast, precise setting thanks to QuickSelect quick adjustment- Double stop signal- Very easy-to-read double scale with color coding of N-m/ft-lb or ft-lb/in-lb- Left-hand tightening by turning the plug-in tools- Further loading after release or loading in the opposite direction of operation, e.g. in the case of stuck bolts, have an effect. the release mechanism, which is thus protected from damage- 2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)- Calibration with the perfectControl® calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessary- Certificate according to DIN EN ISO 6789-2:2017- DBGM (German Federal Utility Model)- In a sturdy plastic case (size 80-100 in a sheet steel case)- Display deviation ± 3 %. Further information: EAN number: 4018754269679 Manufacturer's article number: 96503100.