STAHLWILLE Torque wrench Service MANOSKOP 730 Fix 180-900in lb 96583010

STAHLWILLE torque wrench for work in series production- Adjusting knob can be unscrewed after setting the release torque - this prevents the set torque from being changed unintentionally- The TX® Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the seal- Release- No need to reset to "0" as the measuring element is only loaded during the tightening process- Holder for interchangeable plug-in tools- QuickRelease safety lock- Fast, precise setting thanks to QuickSelect quick adjustment- Double stop signal- Very easy-to-read double scale with color coding of N-m/ft-lb or ft-lb/in-lb- Left-hand tightening by turning the plug-in tools- Further loading after release or loading against the functional direction, e.g. in the case of stuck screws, have an effect on the tightening torque. the release mechanism, which is thus protected from damage- 2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)- Calibration with the perfectControl® calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessary- Certificate according to DIN EN ISO 6789-2:2017- DBGM (German Federal Utility Model)- In a sturdy plastic case (size 80-100 in a sheet steel case)- Display deviation ± 3 %. Further information: EAN number: 4018754269792 Manufacturer's article number: 96583010.