Solid carbide milling cutter, diameter 20 mm, 4 cutting edges, with roughing teeth, 2xDC, chamfer 0.6 mm
Brand: PFERD
Description Short: Solid carbide milling cutter, diameter 20 mm, 4 cutting edges, with roughing teeth, 2xDC, chamfer 0.6 mm
Art.-no. 95263111
Manufacturer article no. 23000355
EAN 4007220716182
PFERD solid carbide milling cutter, diameter 20 mm, 4 cutting edges, with roughing teeth, 2xDC, 0.6 mm chamfer, AlCrN coated, HB shank, universal. The solid carbide milling cutters are suitable for universal use on a wide range of materials. Milling cutter with roughing teeth for versatile use from roughing to finishing and ramping. Weldon shank HB according to DIN 6535 with lateral drive surface.
Brand | PFERD |
EAN | 4007220716182 |
Manufacturer Part Number | 23000355 |
Description Short | Solid carbide milling cutter, diameter 20 mm, 4 cutting edges, with roughing teeth, 2xDC, chamfer 0.6 mm |
Gross Weight | 0.404 kg |
Last viewed
Engine adjustment tool set for Ford TDCi, PSA Hdl, Mazda D 1.4, 1.6
ATORN long adapter, 1/4 inch hexagon to 1/4 inch square, 25 mm
Foot mounting type LB for compact cylinder ACP 115839
LENOX SpeedSlot bimetal hole saw 19 mm
Double open-end wrench, 4x5 mm on hanger
THUNDER XXSW black-blue Low ESD S3S safety shoe, size 37 724951-37
Nipples for couplings Nominal width 7.2-7.8 Double shut-off 107523
CHROMEplus double ring spanner, offset, 17x19mm
Glycerinmano pressure line CrNi steel housing G 1/4 rear centre 116326
Protective cover for miniMONSTER