Wallbox Type 2 socket, 1 phase, max. 3.7 kW, 16 A, 230 V, without RFID, without meter

Charging station for wall or column mounting in accordance with IEC61851 for electric and hybrid vehicles with type 2 socket (IEC 62196-2) up to 3.7 kW charging power up to 16 A (single-phase) 230 V Mode 3 Type B residual current device with overheating protection TÜV tested, CE and RoHS certified The efuturo Wallbox stands out thanks to its compact design as a space-saving charging station for electric and hybrid vehicles. The integrated LED display makes the Wallbox easy to use and provides information about the charging status or possible error messages at a glance. The Wallbox is protected by an RCD type B residual current circuit breaker and thus meets the highest safety standards. The high-quality plastic housing is suitable for safe outdoor operation of the efuturo Wallbox. The integrated Type 2 socket connects the wallbox and your electric or hybrid vehicle quickly and easily with your personal Type 2 charging cable. After a brief communication between the wallbox and the vehicle, charging of the vehicle battery begins without access control. Transform your garage or customer car park into your personal filling station for your electric and hybrid vehicles with the efuturo wallbox. The optionally available stand further enhances your wallbox. With the efuturo wallbox, it is possible to significantly reduce charging time. While the charging cycle for a Renault Zoe takes approx. 25 hours at a household socket (2.3 kW), it takes approx. 16 hours with a 3.7 kW wallbox and only 4.5 hours with an 11 kW wallbox. A 22 kW wallbox is up to 10 times faster, reducing the charging time to approx. 2.5 hours. It should be noted that our standard household sockets are not designed for the amounts of electricity required to charge electric and hybrid vehicles. Although it is possible to charge vehicles from sockets, this should only be considered a temporary solution. The simple design of the efuturo wallbox saves you from any nasty surprises when you receive your electrician's bill. Your electrician will be very familiar with the components used. The extremely expensive RCD type B residual current circuit breaker is already integrated into the efuturo wallbox. This guarantees you the highest level of safety and means that the circuit breaker does not have to be installed separately in an external switch cabinet by a specialist.