For detailed information, other images and documents, please select individual articles from the following table.
Gauge steel
Products
Prices for customers after login
Application
For measuring bore spacings, bore diameters, angularity of bores etc.
Execution
- Ground and lapped
- hardened to 58-62 HRC
- Diameter 0.300 to 0.999 mm with length 40 mm; from diameter 1.000 mm with length 70 mm
- From diameter 3.00 mm: Side 1 with 45° chamfer; Ø marking on end face
- diameter from 1.5 to 2.999 mm: Side 1 with 45° chamfer; Ø marking on cylindrical surface
- diameter from 1.00 to 1.499 mm: : Side 1 with 45° chamfer; without Ø marking
- up to 0.999 mm: both sides sharp-edged and deburred; without Ø marking
Notes
when ordering, please include the diameter of the test pin; nominal size accurate to at least 10 µm, e.g. 10.710 mm or 15.100 mm. Order the nominal size accurate to µm 1-9 using number 32483... Only sizes above approx. 6 mm dia. can be engraved and only with a few characters.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
